Fitness Quest Brutus 655 - Manual (Page 22)

22
FIGURE 9
Step 43.
Step 44.
Step 45.
Step 46.
Step 47.
Step 48.
Step 49.
Attach LEFT BACKREST CUSHION (41) to LEFT OBLIQUE FRAME (4) with 3/8” x 2-5/8” HEX
BOLTS (53) and 3/8” WASHERS (62).
Push PLASTIC BUSHINGS “B” (88) into LEFT BASE BEAM (6).
Push 2” SQUARE END PLUG (71) and 1” x 2” END PLUGS (73) into LEG PRESS SUPPORT
(23).
Attach LEG PRESS SUPPORT (23) to LEFT BASE BEAM (6) with 3/8” x 3-1/2” HEX BOLT (56),
3/8” WASHERS (62) and 3/8” LOCKNUT (67).
Attach ADJUST TUBE (21) to FOOT PLATE (22) with 3/8” x 2-5/8” HEX BOLTS (53) and 3/8”
WASHERS (62).
Attach ADJUST TUBE (21), at desired position, to LEG PRESS SUPPORT (23) with SAFETY
CLASP (24).
Push 2” SQAURE END PLUG (71) into
end of ADJUST TUBE (21).
62
3/8”
WASHER
67
3/8”
LOCKNUT
24
SAFETY
CLASP
41
LEFT
BACKREST
CUSHION
4
LEFT
OBLIQUE
FRAME
53
3/8” x 2-5/8”
HEX BOLT
88
PLASTIC
BUSHING
“B”
6
LEFT
BASE
BEAM
71
2”
SQUARE
END PLUG
62
3/8”
WASHER
71
2”
SQUARE
END PLUG
73
1” x 2”
END PLUG
23
LEG PRESS
SUPPORT
56
3/8” x 3-1/2”
HEX BOLT
21
ADJUST
TUBE
22
FOOT
PLATE
62
3/8”
WASHER
53
3/8” x 2-5/8”
HEX BOLT
62
3/8”
WASHER
67
3/8”
LOCKNUT
FIGURE 9