FUJITSU ScanSnap Upgrade P2WW-1860-01EN Scanner - Manual (Page 49)

45
4.5. Cleaning Carrier Sheet
While using the Carrier Sheet continuously, dirt and dust may stick onto the surface or the interior.
When you use the Carrier Sheet continuously, please clean it regularly as that may be the cause of scanning
error.
4.5.1. Cleaning method
Use a dry soft cloth or a soft cloth slightly moistened with Cleaner F1 (sold separately) or a mild detergent to
lightly wipe off the dirt and dust from the surface and the interior of the Carrier Sheet.
● Never use paint thinner or other organic solvents.
● Do not rub too hard. Otherwise, the Carrier Sheet may be scratched or be deformed.
● After cleaning the interior of the Carrier Sheet with Cleaner F1 or a mild detergent, close
the Carrier Sheet after it has completely dried.
4.5.2. Cleaning Materials
The description of the cleaning material and the part number of Cleaner F1 is as follows.
Description Quantity Parts No.
Cleaner F1 100 ml CA99501-0013
To purchase cleaning materials, contact the FUJITSU scanner dealer where you purchased the product.