FUJITSU ScanSnap Upgrade P2WW-1860-01EN Scanner - Manual (Page 36)

32
4.2. Scanning Different Document Types
The table below summarizes the types of documents that can be scanned on this scanner.
Media Paper commonly used in offices, Post card, Business card,
Photograph, Clipping
Weight Up to127g/m 2 (Up to 34lb),
Up to 63.5g/m 2 (Up to 17lb) * In case of folding in two
A3 (297x420 mm)
A4 (210x297 mm)
A5 (148x210 mm)
A6 (105x148 mm)
B4 (257x364 mm)
B5 (182x257 mm)
B6 (128x182 mm)
Post card (100x148 mm)
Business card (90x55 mm, 55x90 mm)
Letter (8.5x11in, 216x279.4 mm)
11x17 (11x17in, 279.4x431.8 mm) Size
Custom
Width: 50.8 - 216 mm (2 - 8.5 in), Length : 50.8 - 297 mm(2 - 11.69 in)
* For B4, A3 and 11 x 17 fold in two when scanning
Do not use the following documents:
● Documents with clips or staples (they can be used after the paper clips or staples are
removed)
● Documents on which the ink is still wet (they can be used after the paper is thoroughly
dried)
● Documents larger than Legal (width: 8.5 in, length: 14 in) when folded in half
● Documents larger than Legal (width: 8.5 in, length: 14 in) and cannot be folded.
Also, pay attention to the following when you use the Carrier Sheet.
● Use only the Carrier Sheet for ScanSnap.
● Avoid writing, coloring, staining or cutting the black and white pattern part of the Carrier
Sheet. Otherwise, the scanner cannot recognize the Carrier Sheet correctly.
● Load the Carrier Sheet one by one on the scanner.
● Do not place the Carrier Sheet upside-down on the scanner. Otherwise, a paper jam
may happen, or the Carrier Sheet may be damaged.
● Do not leave a document on the Carrier Sheet for a long period of time. The ink may
be transferred onto the Carrier Sheet.
● Do not leave the Carrier Sheet in high-temperature places such as a place facing
direct sunlight or near a heating apparatus for a long period of time. Also, do not use
the Carrier Sheet under a high-temperature environment. Otherwise, it may warp.
● Do not bend, twist, or pull the Carrier Sheet forcibly.
● Do not use a damaged Carrier Sheet. Otherwise, the scanner may be damaged or
malfunction.
● To avoid warping the Carrier Sheet, keep it in a horizontal place where it is not
weighed down, if possible.
● Do not rub the edge of the Carrier Sheet with your fingers. Otherwise, your finger may
get cut.