FUJITSU ScanSnap Upgrade P2WW-1860-01EN Scanner User Manual

Page 46

Output Image Size

Specifies an image size when generating a scanned image.

You can select it from the following document sizes.

Mode: “Create facing pages in one image”

Mode: “Create front and back images separately”

Automatic Detection

A3 (297x420mm)

Carrier Sheet size (216x297mm)

- A4

(210x297mm)

- A5

(148x210mm)

- A6

(105x148mm)

Post Card (100x148mm)

B4 (257x364mm)

- B5

(182x257mm)

- B6

(128x182mm)

Letter (8.5x11in, 216x279.4mm)

11 x 17(11 x 17in, 279.4x431.8mm)

Business Card Portrait (55 x 90mm)

Business Card Landscape (90 x 55mm)

Custom (Can create up to 5)

● If you specify [Automatic Detection] on [Output image size], the size of the scanned

document is automatically determined among the standard sizes (other than Custom and
Carrier Sheet Size) described in the above table. There is no need to re-specify an
[Output image size] to fit the loaded document for that reason.

● If you specify [Carrier Sheet size] on [Output image size], the scanned image is

generated in the Carrier Sheet size. After scanning, you can trim the image to your
preferred size with applications such as Adobe® Acrobat®.
To trim the image using Adobe® Acrobat® 6.0, from the menu bar, select [Tools] →
[Advanced Editing] → [Crop tool], and double-click the selected area for the necessary
image portion.

● If you specify [Automatic Detection] on [Output image size] to scan a document which

size is not among the possible fixed sizes on the above table, the scanned image will
use the closest to one of the fixed sizes bigger than the original.

● If you want to scan a document in its size, create a document size at the [Add custom

size] button, and select that size on [Output image size].

● If you specify [Automatic Detection] on [Output image size], the generated size may be

bigger than that of the scanned document. In this case, carry out the following operation.

● Insert the document into the Carrier Sheet straight.
● When you load the Carrier Sheet onto the scanner, set the side guides to secure the

Carrier Sheet.

● If the situation does not improve with the above methods, specify the size of the

document on [Output image size].