FUJITSU ETERNUSmgr P2X0-0202-01EN - Manual (Page 54)

Chapter 6 Messages
>
6.3 E-mail Messages
ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-
54
Copyright 2009 FUJITSU LIMITED
P2X0-0202-04ENZ0
■ Alarm Text Date Files
The alarm text date file is saved in the directory specified in the setup file using the following file
naming convention. See
"2.3.4 Alarm Text File Settings" (page 26) for more information about
the setup files.
YYYY : Year
MM : Month
DD : Day
For example, "stxgr20081201.log" indicates an alarm text date file that was created on
December 1, 2008. Alarm text date files are created/updated when an alarm history file is
created. Alarm text date files are created/updated when an alarm history file is created.
Alarm text date files are automatically deleted when they are older than the limit specified in the
setup file. See
"Number of Days Alarm Text Date Files are Kept" (page 27) for more information
about the setup files.
■ Alarm Text Fixed File
This is stored in the same directory as the alarm text date files using whatever name is specified
in the setup file. See
"2.3.4 Alarm Text File Settings" (page 26) for more information about the
setup files.
When an alarm history file is created, a line formatted as "Year, Month, Day, Hour, Minutes, Sec-
onds, Machine Address, and Machine Status as Recorded in the Alarm History File" is added to
the alarm text file.
An example of an alarm text is shown below.
See "6.1 Alarm History Messages" (page 52) and "6.3 E-mail Messages" (page 54) for more
information on the target device status output to the alarm text files.
6.3 E-mail Messages
The administrator can be sent E-mail messages that contain notices of ETERNUSmgr startup
and changes in the target device status. These messages indicating changes in the target device
status are identical in format to the alarm history messages.
This section explains the E-mail messages sent by ETERNUSmgr and how to respond to them.
ETERNUSmgr VxxLxx - HTTP Polling engine was started.
[Explanation]The polling engine has started.
[Response] None
stxgrYYYYMMDD.log
20081201130100 10.20.30.40 No hardware error detected.
20081201130600 10.20.30.40 ControllerEnclosure#00:ALARM
20081201144100 10.20.30.40 No hardware error detected.