FUJITSU ETERNUSmgr P2X0-0202-01EN - Manual (Page 51)

Chapter 5 Cautions
>
ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-
51
Copyright 2009 FUJITSU LIMITED
P2X0-0202-04ENZ0
• After uninstalling ETERNUSmgr, if you delete or change the name of the original installation
directory, a "This may have an effect on the registered application. Are you sure you want to
continue?" message will appear. If uninstallation has completed normally, this will not be a
problem.
• Various settings
• Windows® 2000, Windows Server® 2003, and Windows Server® 2003 R2 have an energy
saving mode, but since the ETERNUSmgr monitoring functions are inoperative when the OS
is suspended or sleeping, use of this mode should be avoided.
• With a GRmgr V10L30 or V10L40 setup file, the following parameter descriptions must be
added before the E-mail notification function (available from GRmgr V10L50) can be used by
ETERNUSmgr:
- # Admin Mail Address
ADMIN_MAIL = (Admin Mail Address)
- # Mail Server Address
ADMIN_MAILSV = (Mail Server Address)
- # Mail Server SMTP Port
SMTP_PORT = (Mail Server SMTP Port)
These additions are not necessary if the E-mail notification function is not used.
For details on the above parameters, see
"Admin Mail Address" (page 22) and "Mail
Server Address (ETERNUSmgr for Windows® only)" (page 23) .
• The Mail Server SMTP Port description must be added when the SMTP port No. is other than
the default (25). For details on the above parameters, see
"Mail Server SMTP Port
(ETERNUSmgr for Windows® only)" (page 23) .