FUJITSU ETERNUSmgr P2X0-0202-01EN User Manual
Page 35
Chapter 2 Setup
>
2.5 Monitoring Multiple Target Devices
ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-
35
Copyright 2009 FUJITSU LIMITED
P2X0-0202-04ENZ0
2.5.2.1
ETERNUSmgr for Solaris OS, HP-UX, AIX, and Linux
When adding extra machines, it is easiest to just copy and edit an existing setup file.
Procedure
1
Confirm the contents of the installation directory.
M a k e s u re t ha t t h e n ec e s s ar y f i l e s an d d i r ec tor ies ( st xc h k, _S TXPO LL.IN I,
STXPOLL_1.INI, stxpoll, stxpolld, www/) have all been installed.
# ls /opt/FJSVgrmgr/
stxchk _STXPOLL.INI STXPOLL_1.INI stxpoll stxpolld www/
2
Copy an existing setup file.
File name starts with "STX" and ends with ".INI".
# cp /opt/FJSVgrmgr/STXPOLL_1.INI /opt/FJSVgrmgr/STXPOLL_2.INI
3
Confirm the copy results.
# ls /opt/FJSVgrmgr/
stxchk _STXPOLL.INI STXPOLL_1.INI STXPOLL_2.INI stxpoll stxpolld
www/
4
Edit the copied file. (The STXPOLL_2.INI file is used here.)
Vi editor is used here.
Refer to
for details of how and which parameters should be
changed in the new setup file.
# vi /opt/FJSVgrmgr/STXPOLL_2.INI
End of procedure
2.5.2.2
ETERNUSmgr for Windows®
When adding extra machines, it is easiest to just copy and edit an existing setup file.
Procedure
1
Confirm the contents of the installation directory using Explorer, etc.
Make sure the following files and folder have been installed in the installation directory:
_stxpoll.ini, STXPOLL.exe, STXPOLL_1.INI, stxpolld.exe, stxsmail.exe, and \www (\www
is a folder).
No special text editor is required to edit a setup file.
"_STXPOLL.INI" is provided as a model file. If you copy this file to make
a new setup file, be sure to keep the original file as is.