Furuno FR-2125V - Manual (Page 62)

4-21
3. Unfasten the cable clamp at the rear of the display unit.
4. Using the bolts used to fix the cable clamp fasten the edge guard to the cable
entrance as shown below. (The edge guard protects cables from damage.)
J106
J105
J104
J103
J446
J466
J462
J465
*
*
*
*
*
Edge Guard
03-144-1816-0
Figure 4-20 How to fasten the edge guard
5. Wire the display unit, referring to page 2-9.
6. Fasten the rear cover (supplied) at the rear of the display unit with six binding
screws (M4X8).
REAR VIEW
Rear Cover
03-144-1791-0
Binding Screw
M4X8, 6 pcs.
Figure 4-21 How to fasten rear cover