Furuno FR-2125V - Manual (Page 17)

1-10
3. Retract the stay to lower the monitor.
4. Unfasten eight binding screws (M4X8) to dismount the top cover 1 , right cover
2 and left cover 3 .
5. Loosen three screws (M4X10) fixing the left maintenance cover ( 4 ). Slide the
cover to dismount it.
6. Loosen four screws (M4X10) fixing the lead-in cover ( 5 ) at the rear of the
display pedestal. Slide the cover to dismount it.
Touching inside
of CRT panel
Binding Screw
M4X8, 2 pcs.
Binding Screw
M4X8, 2 pcs.
Left Cover ( 3 )
Left Cover ( 2 )
Push in direction
of arrow
Push in
direction of
arrow.
Binding Screw
M4X8, 4 pcs.
Top Cover ( 1 )
Lead-in Cover ( 5 )
Pan-head Screw
M4X10, 4 pcs.
Left Maintenance Cover ( 4 )
Pan-head Screw
M4X10, 3 pcs.
A
EXPLODED VIEW
(Do same on
other side.)
A
Figure 1-13 How to dismount covers
7. At the left side of the monitor, unfasten the clamp which fixes the control head
cable.
8. At the rear of the display pedestal, fasten the clamp which fixes the control
head cable.