Fabricating the ac power cable (supplied), A) (b) (d), Dpycy-3.5 – Furuno FR-2125V User Manual

Page 28

2-6

Fabricating the AC power cable (supplied)

1. Remove the vinyl sheath by 80 mm.

2. Cut off jute tape wrapped around the armor.

3. Unravel the armor to expose the cores by about 35 mm.

4. Remove insulation of cores by about 10 mm. Fix crimp-on lugs type FV5.5-4 to

the cores.

5. Cover the armor with vinyl tape, leaving the portion which will lie inside the

cable clamp untaped.

40 mm

Clamp here.

Taping

(a)

(b)

(d)

Vinyl sheath

5 mm

Armor

DPYCY-3.5

10 mm

(c)

Approx. 80 mm

Crimp-on lug
FV5.5-4

Core

,,,,,,,,,,,,,,

,,,

Core
S = 3.5 mm

= 2.4 mm

Armor

Vinyl sheath

(sectional view)

Figure 2-8 Fabricating power cable DPYCY-3.5