Furuno FAR-2107 - Manual (Page 24)

FURUNO
FAR-2157/2167DS
SP - 2
E3522S01A-M
Resolution 1280 x 1024 pixel
Effective radar diameter 308 mm (H: 64 kHz, V: 60 Hz)
Viewable range
1080 mm
3.4 Minimum range 22 m
3.5 Range discrimination 26 m
3.6 Range scales, Ring interval, Number of rings
Range (NM) 0.125 0.25 0.5 0.75 1 1.5 2 3 4 6 8 12
Ring interval (NM) 0.025 0.05 0.1 0.25 0.25 0.25 0.5 0.5 1 1 2 2
Number of rings 5 5 5 3 6 6 4 6 4 6 4 6
16 24 32 48 72 96 120
4 4 8 8 12 16 20
4 6 4 6 6 6 6
3.7 Range accuracy 1% of the maximum range of the scale in use or 10m,
whichever is the greater
3.8 Bearing discrimination 1.18° (XN4A), 0.98° (XN5A), 2.5° (SN30AF), 2.0° (SN36AF)
3.9 Bearing accuracy ±1°
3.10 Presentation mode Head-up, Cursor-gyro, Course-up, North-up,
True motion (sea or ground stabilization)
3.11 ARPA Auto or manual acquisition: 100 targets in 0.2-24(32) NM
Auto tracking on all acquired targets
Tracking: 5/10 pts on all target
3.12 AIS Capacity: 1000 targets, Tracking: 10 pts on all target
Time of vector: Off/30s/1-60 minutes
3.13 Radar map 20,000 pts in radar mode, 6000 pts on IC card in chart mode
3.14 Acquisition zone 2 zones
3.15 Interswitch function Selectable from menu
4 INTERFACE
4.1 Heading signal Synchro signal (20-100VDC or 20-135VAC 50/60/400/500Hz) or
Stepper signal (20-100VDC), built-in interface (option) required,
AD-10 format or IEC61162-2
4.2 Speed log IEC61162-1
4.3 AIS IEC61162-2
4.4 Input data sentences ABK, ACK, ALR, BWC, BWR, DBK, DBS, DBT, DPT, DTM, GGA,
GLL, HDT, MTW, MWV, RMB, RMC, RTE, THS, VBW, VDM, VDO,
VDR, VHW, VTG, VWR, VWT, WPL, ZDA
4.5 Output data sentences ABM, ACK, ALR, BBM, OSD, RSD, TLB, TLL, TTD, TTM, VSD
5 POWER SOURCE
5.1 Monitor unit 24 VDC:2.3 A or 100-230 VAC: 0.7 A, 1 phase, 50/60 Hz
5.2 Processor unit 24VDC or 100-115/220-230 VAC: 3.0/1.5A, 1 phase, 50/60 Hz
5.3 Power supply unit
FAR-2157 main 100-115/220-230 VAC: 4.4/2.0A, 1 phase, 50/60 Hz
FAR-2157 motor 24VDC: 4A or 200/220 VAC: 2.0A, 3 phase, 50/60 Hz