FieldServer FS-8704-06 - Manual (Page 32)

FS-8704-06 BACnet IP Driver Manual Page 32 of 57
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
Appendix A.8.7. Map Descriptor Example – Set up a Permanent Static Recipient List
A permanent static RecipientList may be configured directly on the FieldServer, eliminating the need for a remote workstation to modify the RecipientList in order to
receive Event Notifications. Using this option makes the RecipientList read-only, i.e. it can then only be modified via the FieldServer config.csv file.
This is done by adding an Event_Receiver section to the config.csv. This section must appear after the definition and all other references to the relevant Notification Class
object.
Map_Descriptors
Map_Descriptor_Name , Data_Array_Name , Data_Array_Offset , Function , Node_Name , Object_Type , Object_Instance , Ack_Required
BAC_NC_P1 , DA_NC_01 , 0 , Passive , Virtual_DEV_11 , NC , 1 , No
Notification Class Objects are configured as Map Descriptors. Each Notification Class Object maintains a RecipientList Property which may contain multiple destinations.
Each destination is configured as an Event_Receiver after the relevant Notification Class Object has been configured.
Map_Descriptors
Map_Descriptor_Name , Data_Array_Name , Data_Array_Offset , Function , Node_Name , Object_Type , Object_Instance , Notification_Class , Low_Alarm , High_Alarm
CMD_AI_01 , DA_AI_01 , 10 , Passive , Virtual_DEV_11 , AI , 1 , BAC_NC_P1 , 20 , 30
Event_Receiver
Node_Name , Node_ID , Protocol , Process_ID , Notification_Class_MD , Adapter
OWS_01 , 10 , BACnet_MSTP , 12345 , BAC_NC_P1 , N1
OWS_02 , 12 , BACnet_MSTP , 56789 , BAC_NC_P1 , N1
This is the Notification Class
map descriptor governing the
sending of Event Notifications
(Intrinsic Alarming)
This is a BACnet Object that
will report its alarms via the
Notification Class map
descriptor BAC_NC_P1
This section sets up RecipientList entries for the defined Notification Class map
descriptor. It must appear at the end of the configuration, after all other
references to the Notification Class map descriptor.