FieldServer FS-8704-06 - Manual (Page 14)

FS-8704-06 BACnet IP Driver Manual Page 14 of 57
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: [email protected]
6.2 Server Side Connection Parameters
Section Title
Connections
Column Title
Function Legal Values
Adapter Adapter Name N1, N2 5
Protocol Specify protocol used BACnet_IP
Connection_Type*
Specify if this Connection should act as a BBMD Server on the
network. Refer to Appendix A.5 for more information.
BBMD, -
IP_Port*
Specify the UDP port that will be used to communicate with
other BACnet Client devices. Any legal IP port value (1
- 65535); 47808
Example
// Server Side Connections
Connections
Adapter , Protocol , Connection_Type
N1 , Bacnet_IP , BBMD
6.3 Server Side Node Parameters
Section Title
Nodes
Column Title
Function Legal Values
Node_Name Provide name for Node
Up to 31
alphanumeric
characters
Node_ID BACnet station address of physical Server node 0 - 4194303
Protocol Specify protocol used BACnet_IP
Node_Option*
Enable or disable COV for this Node. Refer to Appendix A.8 for
further information. COV_Enable,
COV_Disable, -
Node_Type*
Specific to Trane applications. The Node type can be defined.
Refer to Appendix C.2 BCU, Summit
Workstation, -
Disabled_Services*
Certain BACnet Services can be disabled on a BACnet Server Node
when specific requirements necessitate this. Refer to Appendix
A.12 for more information.
-, WPM, COV
Model_Name* Sets the Model Name Property of the Device Object
Up to 32
alphanumeric
characters
5 Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction manual for details of the ports available
on specific hardware.