FUJITSU fi-5110EOXM - Manual (Page 91)

5.2 Troubleshooting Checklist
ScanSnap fi-5110EOXM Operator's Guide 75
T
roub
leshooting
5
Scanned images are
not displayed on the
screen (when"Allow
automatic blank page
removal" is enabled). When "Allow automatic
blank page removal" is
enabled, almost blank
documents with only a few
characters may be
accidentally recognized as
blank pages and removed
from the scanned image
data. Select [Setting...] - [Scanning] tab and click
the [Option...] button. Then clear the "Allow
automatic blank page removal"
checkbox.
Scanned images are
skewed (when "Allow
automatic image
deskew" is enabled). Are the documents fed into
the ADF with a skew of +-5
degrees? The "Allow automatic image deskew" function
can correct skewed images up to +-5 degrees.
Load the document onto the scanner so that
the document skew does not exceed this limit.
Depending on the contents
of the document, the
automatic image deskew
may not work properly. Refer to " Allow automatic image deskew."
(page 42)
(*1): To confirm whether the scanner is connected with USB1.1 or USB2.0, click and hold the ScanSnap
icon , select [Help] - [About ScanSnap Manager], then click [Detail] button on [Version
Information] window. [USB type] is displayed in [Scanner information].
(*2): "Multi-feed" is a phenomenon where two or more sheets are fed into the scanner at the same time.
* Visit our Web site for your reference. Other useful information will be posted on the FAQ at the
following Web site.
http://scansnap.fujitsu.com/
Symptom Check This Item Remedy