FUJITSU fi-5110EOXM - Manual (Page 63)

3.4 Changing Scan Settings
ScanSnap fi-5110EOXM Operator's Guide 47
Basic Scanner Oper
ations
3
1) In the "Add or Remove Custom sizes" window, select the document size to be
changed and click the [Change...] button.
2) Change the settings in the [Additional custom size settings] window.
3) To complete the setting, click the [OK] button.
4) The "Add or Remove Custom sizes" window returns and the changes are saved.
Click [Close] to exit from the "Add or Remove Custom sizes" window.
HINT
When "Automatic detection" is specified, the scanner automatically detects the
document size and selects an appropriate document size from the standard
sizes (except for custom document sizes) described in the previous page. Thus
there is no need to specify "Paper size" again to match the size of the loaded
document, which makes ScanSnap easier to use.
ATTENTION
•
When you select "Automatic detection" and load an A6 size document onto the
scanner, the document is scanned as "Post card" size.
•
Do not load documents with different sizes simultaneously onto the scanner.
•
When “Automatic detection” is selected, documents of non-standard sizes are
also recognized and scanned as documents of a standard size (Letter, Legal,
A4, B5, A5, B6, Post card, or Business card), that is closest to their actual
length. To scan these types of documents in their original sizes, select "Cus-
tom" in "Paper size:" and then specify the document size in the dialog that
appears when you click the [Custom...] button.