FUJITSU fi-5110EOXM - Manual (Page 40)

24
HINT
•
By default documents are scanned according to the following
settings: "Duplex scan", "Scan mode: Normal (Fastest)" and "Color mode:
Auto Color Detection".
•
Before scanning documents containing printed or handwritten text, select the
"Setting for text only document" checkbox under [Option...] on the [Scanning]
tab in the "Scan and Save Settings" dialog. For details, refer to "3.4 Changing
Scan Settings" (on page 32).
•
The application that is automatically started up after the scanning depends on
the setting of the [Application] tab in the "Scan and Save Settings" dialog. For
details, refer to "3.4 Changing Scan Settings" (on page 32).
•
Scanned documents can also be saved in an image format (JPEG). In this
case, change the document scan settings before scanning the document. For
details about changing the document scan settings, refer to "3.4 Changing
Scan Settings" (on page 32). The following settings can be changed:
•
Application linked to ScanSnap
•
Image saving folder
•
Filename format
•
File format (*.pdf/*.jpg)
•
Paper size
•
Scan mode (draft, high quality, setting for text only document,
automatically remove blank pages, deskew images)
•
File size for scanned image (the compression ration)
•
The scanning scale may vary slightly.