FUJITSU fi-4530C - Manual (Page 85)

4.3 Replacing the Pick Roller
fi-4530C Image Scanner Operator’s Guide 79
REPLACING CONSUMABLES
4
Click the [Clear] button beside the [Pick Counts] under [Pick Roller Counts], then click
the [OK] button. This resets the pick counter to "0".
• For Windows 95 / Windows NT 4.0
1) When turning on the power, check that the scanner is connected to your PC.
2) Right click the [FUJITSU Scanner Control Center] icon in the task tray, then select
[Option]
3) Double click [Scanner Information]. The following screen is displayed.