Furuno NAVNET 1752C - Manual (Page 23)

1. OPERATIONAL OVERVIEW
1-9
1.5 Display Brilliance, Panel Brilliance, Contrast,
Hue
You can adjust display brilliance, panel brilliance, contrast and hue
(MODEL1722C/1723C series only) as shown below.
1.5.1 Display brilliance, panel brilliance
1. Press the [POWER/BRILL] key momentarily. A set of soft keys for
adjustment of brilliance, contrast and hue (MODEL1722C/1723C series only)
appear. The last-used adjustment window appears. In the example below the
display brilliance adjustment window is shown.
.250/ 319.9 ° M .125nm
SP
H-UP
.250/ 319.9 ° M .125nm
SP
H-UP
MODEL1722C/1723C series MODEL1722 series
PANEL
BRILL
CONTST
/HUE
RETURN
DISPLAY BRILLIANCE
8
PANEL
BRILL
CONTST
BRILL
CONTST
RETURN
DISPLAY BRILLIANCE
8
Current selection is higtlighted.
DISPLY
BRILL DISPLY
BRILL
RADAR
STBY
RADAR
STBY
BRILL
CONTST
Brilliance adjustment soft keys
2. Press the DISPLY BRILL or PANEL BRILL soft key as appropriate. An
adjustment window appears at the bottom of the screen. This window shows
the name of the item selected for adjustment plus current brilliance level, by
bar graph.
DISPLAY BRILLIANCE
8
PANEL BRILLIANCE
8
Display brilliance Panel brilliance
Display brilliance and panel brilliance windows
3. Adjust the [ENTER] knob, clockwise to raise the setting or counterclockwise
to decrease it. You may also use the soft key pressed at step 2, in which
case the item selected is adjusted cyclically, from low to high. Eight levels of
display brilliance and panel brilliance are available.
4. Hit the RETURN soft key to finish.
The display brilliance can be adjusted by pressing the [POWER/BRILL] key.
If the unit is turned on with minimum display brilliance, press the
[POWER/BRILL] key consecutively to adjust the brilliance.