Furuno NAVNET 1752C - Manual (Page 121)

3. PLOTTER OPERATION
3-37
3.9 Routes
Often a trip from one place to another involves several course changes,
requiring a series of route points (waypoints) which you navigate to, one after
another. The sequence of waypoints leading to the ultimate destination is called
a route. Your unit can automatically advance to the next waypoint on a route, so
you do not have to change the destination waypoint repeatedly.
You can store up to 200 routes, and a route may have 35 waypoints.
3.9.1 Creating routes
Entering a route with existing waypoints
This method constructs routes using existing waypoints.
1. Press the [MENU] key.
2. Press the WAYPOINTS/ROUTES soft key.
3. Press the ROUTES soft key to open the route menu. (No data will be shown
if there is no routes created.)
ROUTE
GOTO
NEW
ROUTE
EDIT
ROUTE
ERASE
ROUTE
RETURN
Number of waypoints
in route
Route name
Total length of route
▲
001
WAYPOINTS
35 LENGTH
25.6 nm
002
WAYPOINTS
2 LENGTH
56.7 nm
003
WAYPOINTS
3 LENGTH
21.1 nm
004
WAYPOINTS
3 LENGTH
21.1 nm
PUSH ENTER KNOB TO
SEARCH FOR
- --
Route menu
4. Press the NEW ROUTE soft key to open the new route entry screen.
ROUTE NAME
COMMENT
0 0 1
NEW
ROUTE
PLOT
LOCAL
LIST
ALPHA
LIST
CONECT
CANCEL
New route entry screen