Furuno NAVNET 1752C - Manual (Page 114)

3. PLOTTER OPERATION
3-30
SELECT MARK
Waypoint mark shape selection window
8. Operate the cursor pad to select shape desired.
9. Press the ENTER soft key.
10. For the MODEL1722C/1723C series, press the SELECT MARK and MARK
COLOR soft keys in that order to open the waypoint mark color selection
window. Select color desired and press the ENTER soft key.
SELECT COLOR
▲
¤ RED
¡ YELLOW
¡ GREEN
¡ LIGHT BLUE
¡ PURPLE
¡ BLUE
¡ WHITE
▼
Waypoint mark color selection window
Note: You cannot change the shape and color of a waypoint when the
proximity alarm radius for it is other than “zero.” To change shape or
color, enter all zeroes as the proximity alarm radius.
11. You can change the name (1 to 6 characters), comment (13 characters), L/L
position and the proximity alarm radius for a waypoint as follows:
a) Use the cursor pad to select the NAME, COMMENT, POSITION or
PROXIMITY ALARM RADIUS field. (“Proximity alarm radius” provides for
visual and aural alarms when your boat nears a waypoint by the distance
specified. A circle with a diagonal line through it marks any waypoint for
which its proximity alarm radius is other than zero.)
b) Use the cursor pad to select location.
c) Rotate the [ENTER] knob to select appropriate alphanumeric character.