Freedom9 IP 800 - Manual (Page 71)

freeView IP 800 User’s Manual
• Once the firmware file has been uploaded, it is checked to see if it is a valid firmware file and
whether there were any transmission errors. In the case of an error, the Upload Firmware
function will be aborted.
• Verify the new version of the firmware, and click “Update”. Note: This process is non
reversible and might take a few minutes. Make sure the freeView IP 800 is not powered off
during the update process; otherwise the device may be permanently damaged.
• After the firmware has been saved, a prompt will appear to reset the device manually. After
the unit is reset, the new firmware will be loaded. However, the user will have to log into the
unit again.
• Note: The firmware update procedure is thorough in looking for errors and inconsistencies,
reducing the chances of an error occurring. However, only experienced staff or administrators
should perform a firmware update. Ensure that the device is not powered off during the
firmware upgrade.
6.5.4 Unit Reset
Figure 6-22: Unit Reset
This section allows the user to reset specific parts of the device. The parts include: the keyboard
and mouse, the video engine, and the entire device itself. Resetting the device itself is mainly
needed to activate a newly updated firmware. It will close all current connections to the
69