Freedom9 IP 800 - Manual (Page 39)

freeView IP 800 User’s Manual
However, the Remote Console window can be resized manually in the local window system the
same way as other applications.
Note: The Remote Console window must be selected in the local operating system in order for
mouse and keyboard input to be sent to the remote host.
5.10.1 Remote Console Control Bar
The top bar of the Remote Console window shown in Figure 5-5 contains the control bar. The
control bar displays the state of the remote device and also allows the user to change the
Remote Console settings.
Figure 5-5: Remote Console Control Bar
Ctrl+Alt+Delete
This button sends the key combination “Control-Alt-Delete” to the remote system (see Section 6
for instructions on defining new key combination buttons).
Auto Adjust button
If the video display becomes distorted, click this button and wait a few seconds while the device
tries to automatically readjust the video settings.
Sync mouse button
This button activates the mouse synchronization process. Choose this option to synchronize the
local with the remote mouse cursor. This is especially necessary when using accelerated mouse
settings on the host system. In general, there is no need to change mouse settings on the host.
This button is only available when using double mouse mode.
Single/Double Mouse Mode
This button switches between Single Mouse Mode (only the remote mouse pointer is visible) and
Double Mouse Mode (both remote and local mouse pointers are visible and need to be
synchronized). Single mouse mode is only available if using SUN JVM 1.3 or higher.
37