Freedom9 IP 800 - Manual (Page 43)

freeView IP 800 User’s Manual
Video Settings Through The Remote Console
Figure 5-10: Video Settings Panel
Brightness: Controls the brightness of the picture.
Contrast: Controls the contrast of the picture.
Clock: Defines the horizontal frequency for a video line and depends on the video mode.
Different video card types may require different values. The default settings in conjunction with
the auto adjustment procedure should be adequate for common configurations. If the picture
quality is still poor after auto adjustment, change this setting together with the sampling phase to
achieve a better quality.
Phase: Defines the phase for video sampling, used with the sampling clock setting to control the
display quality.
Horizontal Position: Adjusts the horizontal position of the screen.
Vertical Position: Adjusts the vertical position of the screen.
Reset this Mode: Reset current mode specific settings to the factory-made defaults.
Reset all Modes: Reset all modes to the factory-made defaults.
Save Changes: Save changes permanently.
Undo Changes: Restore last saved settings.
41