FUJITSU XG2600 User Manual
Page 34
XG2600 Hardware Guide
Chapter 2 Installation
Installation of the switch
34
The diagram below shows in which slots PSUs need to be installed and airflow direction of the fans.
: Installing
–
: not installing
The LED lights in a correct configuration as follows:
–
: Unsupported because the unit is not installed
If the LED indicators are different from the above, it may be due to the incorrect configuration of PSUs and/or Fans, or
there may be failures with PSUs and/or Fans.
If the switch is installed in Front-Access configuration, it is necessary to remove PSUs and install them in different slots
than factory default ones, and change direction of fans.
Power Supply Unit
Fan Unit
Switch Port Side
Switch Fan Unit Side
FAN1 Slot
FAN2 Slot
PSU1 Slot
PSU2 Slot
PSU1 Slot
PSU2 Slot
Installation
Airflow
Installation
Airflow
–
–
Exhaust
Exhaust
Switch Port Side
Power Supply Unit
Switch Fan Unit Side
Switch Port Side
Switch
Fan Unit Side
Slot 1/Slot 2
READY
CHECK
PSU1
PSU2
FAN
PSU1
PSU2
PSU1
PSU2
STATUS
OUTFLOW
POWER
Green
Off
Green
Green
Green
–
–
Green
Green
Green
Green