Front-access configuration (user configured) – FUJITSU XG2600 User Manual
Page 33
XG2600 Hardware Guide
Chapter 2 Installation
Installation of the switch
33
Front-Access Configuration (User Configured)
The port side (SFP+ slots) is facing forward in a rack.
Caution
• Do not install PSUs facing the front side of the rack. They do not work properly
• Before installing the switch in the rack, check if the airflow direction of the fans is correct. If the
air flows incorrectly, it may cause failure to the switch.
XG2600
Exhaust
Intake
(Caution)
PSU1
PSU2
FAN1
FAN2
Rack Rear
Rack Front
(Caution)