FUJITSU PG-LND101 - Manual (Page 69)

5 Teaming(AFT/ALB/SFT)
69
E
5.3 Removing a Team
Perform the following procedures to remove a team.
1 Log on with the administrator privileges.
2 Click [Start] → [Settings] → [Control Panel] → [Intel®PROSet
Wired], and start Intel
®
PROSet.
3 Select the team to delete.
4 Click [Remove team].
A confirmation message appears.
5 Click [OK].
6 Click [OK] and exit Intel
®
PROSet.
7 Restart the system.
` Creating an AFT, ALB, or SFT team in Windows OS causes a virtual adapter
(Intel(R) Advanced Network Service Virtual Adapter) to be created in [Device
Manager], [Network and Dial-up Connections], or [Network Connection] of the
system. However, do not disable or delete the virtual adapter from [Device Manager],
[Network and Dial-up Connections], or [Network Connection]. Make sure to use
Intel
®
PROSet to remove this virtual adapter.