FUJITSU PG-LND101 - Manual (Page 48)

48
1
1Gbit/s Ethernet I/O Module
This chapter explains the features and specifications of this product.
1.1 Overview
This product is an expansion LAN card exclusive to BX620 S2 Server Blade. This product has a
dual-port (2 ports) LAN controller, and provides LAN connection completely separate/ independent
of the onboard LAN. The external access is performed via the Switch Blade installed to the network
blade slot 3 or 4 (NET3 or NET4) on the chassis.
One product can be added to one BX620 S2 Server Blade. The following figure shows a
configuration example when ten BX620 S2 Server Blades (slot 1 to 10) are installed in the chassis. In
this example, 1Gbit/s Ethernet I/O Modules are installed in all server blades for convenience of
explaining LAN connection between each 1Gbit/s Ethernet I/O Module and network blade, however,
1Gbit/s Ethernet I/O Modules do not necessarily need to be installed on all server blades.
PRIMERGY BX600
Switch Blade(NET 1)
1 2 3 4 5 6 7 8 9 10
c d
C D
a b a b a b a b a b a b
PRIMERGY BX600
Switch Blade(NET 2)
1 2 3 4 5 6 7 8 9 10
a b
A B
1
c d
C D
2
a b
A B
3 4 5 6 7 8 9 10
PRIMERGY BX620 S2 Server Blades
1 2 3 4 5 6 7 8 9 10 1 2 3 4 5 6 7 8 9 10
PRIMERGY BX600
Switch Blade(NET 3) PRIMERGY BX600
Switch Blade(NET 4)
Onboard LAN
A B A B A B A B A B A B
11 12 13 11 12 13
11 12 13 11 12 13
1Gbit/s Ethernet
I/O Module
1Gbit/s Ethernet I/O Modules are connected to network blade slot3 or 4 (NET3 or 4)