FUJITSU PG-LND101 - Manual (Page 64)

64
4.4 Uninstalling
Perform the following procedures to uninstall Intel
®
PROSet.
1 Log on with the administrator privileges.
2 Click [Start] → [Settings] → [Control Panel].
3 Click [Add or Remove Programs] or [Add/Remove Applications].
4 Select [Intel(R) PROSet for wired Connections] and click
[Remove].
5 Follow the instruction on the window for uninstallation.
4.5 1Gbit/s Ethernet I/O Module Test
Perform the following procedures to test 1Gbit/s Ethernet I/O Module.
4.5.1 Test Method
1 Log on with administrator privileges.
2 Click [Start] → [Settings] → [Control Panel] → [Intel®PROSet
Wired], and start Intel
®
PROSet.
3 Select LAN adapter (1Gbit/s Ethernet I/O Module) to test and click
[Diagnostics] tab.
4 Select a tab to diagnose, click [Run Test] to test the 1Gbit/s
Ethernet I/O Module.
4.5.2 Actions to Take When an Error Occurs
Follow the instructions below.
• Check that the 1Gbit/s Ethernet I/O Module is correctly installed to the server blade daughter card
slot.
• Check the connecting environment of switches and cables.
• If the error still occurs, contact an office listed in "Appendix B Contact Information" (
J pg.77).
` If team and VLAN are included, remove both of them using Intel
®
PROSet
before uninstallation.
J"5.3 Removing a Team"(pg.69)
J"6.3 Removing VLAN"(pg.74)