FUJITSU PG-LND101 - Manual (Page 55)

3 Installing the LAN Driver
55
E
3 Click [Device Manager].
On the Device Manager list, check if a recognized network adapter is present.
When a recognized network adapter is present, [Network adapters] appears.
• When a recognized network adapter is present
Perform "3.2.2 Updating LAN Drivers" ( J pg.56) on the LAN device name under
[Network adapters], then "3.2.3 Installing the LAN Driver" ( J pg.58) on [Ethernet
controller] under [Other devices].
` When the LAN driver is installed to [Other devices] before updating the driver for
the network adapter recognized immediately after the OS installation
When driver installation starts, the following window appears.
Clicking [Finish] displays the [Help and Support Center] window. Click [X] to
close the window. After installation, the "!" mark is displayed at the LAN device
name in Device Manager. Device names are displayed properly when all LAN
drivers are installed and the system is restarted.
` When a recognized network adapter is not present
Unrecognized network
adapters
Recognized network
adapters