FUJITSU PG-LND101 - Manual (Page 56)

56
Perform "3.2.3 Installing the LAN Driver" (Jpg.58) on [Ethernet controller] under
[Other devices].
3.2.2 Updating LAN Drivers
Perform the following procedures on all LAN device names under [Network adapters] in [Device
Manager].
Windows Server 2003/Windows 2000 Server
1 Double-click a LAN device name under [Network adapters].
` The LAN device names are displayed as follows.
2 Insert a CD or floppy disk of the LAN driver.
Confirm the folder that contains the downloaded LAN driver in advance.
3 Double click the icon of the LAN device.
The properties are displayed.
4 Click the [Driver] tab and click [Update Driver].
The [Welcome to the Upgrade Device Driver Wizard] window appears.
5 Select [Install the software automatically] and click [Next].
The driver will be installed.
6 Click [Finish].
7 Click [Close].
Windows Server 2003 x64
1 Double-click a LAN device name under [Network adapters].
` The LAN device names are displayed as follows.
Ethernet controller LAN device name
PG-LND101 Intel(R) PRO/1000 MB Dual Port Server Connection
` When AFT is already created, the virtual adapter below exists. Do not
select it.
• Intel(R) Advanced Network Service Virtual Adapter
Ethernet controller LAN device name
PG-LND101 Intel(R) PRO/1000 MB Dual Port Server Connection