FUJITSU PG-LND101 - Manual (Page 50)

50
2
Installing a 1Gbit/s Ethernet I/O
Module
This chapter explains how to install a 1Gbit/s Ethernet I/O Module to the server
blade.
WARNING
CAUTION
• When installing or removing the 1Gbit/s Ethernet I/O Module, make sure to
remove the server blade from the chassis. Failure to do so may cause electric
shock. For details on how to remove the server blade from the chassis, refer to
"Hardware Guide (Chassis)".
• The circuit boards and soldered parts of internal options are exposed. They can
be damaged by static electricity. Before handling them, first touch a metal part of
the server to discharge static electricity from your body.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas or
the edges of the circuit boards.
• Expansion cards are susceptible to static electricity. Place them on conductive
pads or keep them in their packaging as long as they are not necessary.