Operation – Harman-Kardon HA160-0004-A User Manual
Page 51
Operation
47
Signature 2.0
Figure OSD-28
Within five seconds press the
Enter
button v and the
station will be tuned.
NOTE: Although any frequency within either the AM
or FM band may be tuned directly, you may not tune a
station in one band while the other is in use. To tune a
station in the band other than the one in use, first change
bands by pressing the
Tuner
button g and then
entering the station’s frequency.
Preset Tuning
The 2.0 allows you to enter up to thirty stations into
the preset memory system so that they may be easily
recalled. Stations in the present memory may be selected
from either the remote or front panel.
Once a station has been tuned, it may be entered
into the preset memory system by simply pressing
the buttons for a number between “01” and “30” using
the
Numeric Keys
w on the remote. Note that
the number will appear on both the front panel
Information Display
(Figure FPD-16) and on-screen
message (Figure OSD-29) as it is entered.
Figure FPD-16
90.7 FM . Vol
01 10
T u n e r P S e t : 2 4
S t e r e o 7 9 0
Figure OSD-29
Within five seconds press the
Store
button
to
enter the number to the 2.0’s memory. The entry will
be confirmed by noting that the preset number will
move to the top line of both displays (Figures FPD-11
and OSD-30).
Figure OSD-30
Stations may also be added through the use of the
Tuner Menu
, as described on page 50.
To delete an individual preset after it has been entered,
first tune to the station. To remove it from the memory
press the
“0” Numeric Key
w and then press the
Store
button
within five seconds.
Once a station is entered into the preset memory it may
be recalled in one of four ways:
• Press the
Presets
button z to step through the
stations in the memory in numerical order. Each press
of the button will move to the next station in the
preset memory.
• Press the front panel
Tune
buttons 7 to scroll up or
down through the stations in the memory. Each press
of the button will move to the next station in the
preset memory.
T u n e r P S e t : 0 1
S t e r e o
T u n e r P S e t :
S t e r e o 0 1