Datacard Group RL90 - Manual (Page 81)

RP90 Plus E and RL90 User Guide 75
Laminator specifications
Transfer method Halogen lamp built-in heat roller method
Transfer time 20 seconds. The time varies according to settings.
Usage environment
Temperature:
59° F to 86° F (15° C to 30° C)
Storage environment
Temperature:
5° F to 131°F (-15° C to 55° C)
Humidity: 30% to 70% (without condensation)
Power supply: 100-120VAC or 220-240VAC (±10%)
Power consumption: Approximately 200 W
Weight: 17.6 lbs (8 kg)
Sound level: less than 70dB(A) according
to DIN45635, part 19 (EN27779).
Tips – Electrical
• Check that the red
INLET switch, located
on the back of the
laminator, is set for your
input voltage.