Datacard Group RL90 - Manual (Page 6)

Liability statement
vi RP90 Plus E and RL90 User Guide
Liability statement
This Datacard® product has been built to the high standards of DataCard Corporation
Corporation (doing business as Datacard Group). Please note and heed the WARNING
and CAUTION labels that have been placed on the equipment for your safety. PLEASE
DO NOT ATTEMPT TO OPERATE OR REPAIR THIS EQUIPMENT WITHOUT
ADEQUATE TRAINING. ANY USE, OPERATION OR REPAIR IN CONTRAVENTION OF
THIS DOCUMENT IS AT YOUR OWN RISK. BY ACCEPTANCE OF THIS SYSTEM YOU
HEREBY ASSUME ALL LIABILITY CONSEQUENT TO YOUR USE OR MISUSE OF THIS
EQUIPMENT. DATACARD CORPORATION SHALL NOT BE LIABLE FOR ANY
INCIDENTAL, INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGE OF ANY KIND.
Equipment specifications, applications and options are subject to change at the sole
discretion of DataCard Corporation without notice.
Safety
All Datacard® products are built to strict safety and reliability specifications in accordance
with UL60950 and Canadian requirements, and the Low Voltage Directive 73/23/EEC.
Therefore, safety issues pertaining to operation and repair of Datacard® equipment are
primarily environmental and human interface.
The following basic safety tips are given to ensure safe installation, operation and
maintenance of Datacard® equipment and are not to be considered as comprehensive on
all matters of safety.
Safe environment
• Connect equipment to a grounded facility power source. Do not defeat or bypass
the ground lead.
• Place the equipment on a stable surface (table) and ensure floors in the work area
are dry and non-slip. Insulated rubber floor mats are preferred.
• Know the location of equipment branch circuit interrupters or circuit breakers and
how to turn them on and off in case of emergency.
• Know the location of fire extinguishers and how to use them. ABC type
extinguishers may be used on electrical fires.
• Know local procedures for first aid and emergency assistance at the customer
facility.
• Use adequate lighting at the equipment.
• Maintain the recommended range of temperature and humidity in equipment area.
• Keep paper and foreign materials off the printer and optional laminator.
• Keep all dust, dirt, food, liquids, etc. away from the printer at all times.
Safe human interface
• Use proper lifting techniques when moving or installing the equipment.
• Use standard electrostatic discharge (ESD) precautions when working on or near
electrical circuits.