Datacard Group RL90 - Manual (Page 41)

Using the LCD menus
RP90 Plus E and RL90 User Guide 35
Using the LCD menus
About the Printer LCD panel
The printer LCD panel has a 2-line display,
six keys, a Ready light, Error light, and
speaker.
The display background color changes
according to the printer's function; the
background is bright green during
initialization, orange while processing a
card, and red on printer error. These colors
can be changed using the LCD panel.
Ready LED (green)
Steady Green The printer is ready and waiting to print cards.
Blinking The printer is receiving data.
Off The printer stopped due to error, initialization or preheat mode, or
operator setting preferences.
Error LED (red)
On The printer has a condition that requires service or the printer did
not power on correctly. To correct the condition, press the RESET
and then the ENTER key. If this does not correct the condition,
power the printer off, and then back on before calling for service.
OFF Normal status
Keys:
Reset Initializes the printer. Use the Reset key after loading supplies, to
end Power Saving, or after an error occurs.
Menu Press MENU to access the printer settings. Continue to press the
MENU key to access the settings in the order listed in
“Using the
Printer LCD panel” on page 36 .
Enter Confirms the user selection.
Arrow Keys Use the up and down arrow keys to select options within a menu
selection.
Exit Exits the current menu or menu selection and returns user to the
previous menu selection.
LCD Display
Line one of the display shows the current printer or mode status.
The > symbol following a menu selection indicates that there are
subcategories listed within the selection. Use the up and down
arrow keys to select these options.