The back of the printer – Datacard Group RL90 User Manual
Page 10
About the Printer
4
RP90 Plus E and RL90 User Guide
The back of the printer
Power receptacle
Plug in the power cord.
USB port
Plug in the USB cable.
Ethernet port
Plug in the Network cable.
Laminator connection port
Used to connect the optional laminator module or other
optional equipment.
Future expansion ports
Not used at this time.
CAUTION:
Do not connect or disconnect the laminator cable while the printer or
laminator are powered on.
CAUTION:
Do not keep the power cord connected to facility power unless the
printer is also connected to the power cord.
This manual is related to the following products: