AltiGen MAXCS 7.0 AltiConsole - Manual (Page 35)

AltiConsole Manual 31
C
H A P T E R
5
Configuring AltiConsole Settings
Click the Setup button at the bottom of the main window to open the Setup
screen where you can set your extension number, the default auto attendant,
audio and popup behavior, the overhead paging connection and method,
and your speed dial numbers.
If you are a member of a hunt group/workgroup or of multiple groups, and
you checked Monitor group call queue in the AltiConsole login dialog
box, a Group tab also appears in the Setup screen. If you are an Operator
or member of an Operator workgroup, a BLF List tab appears.
In these windows, you can save your changes by clicking OK.
Setting AltiConsole Behavior, Overhead Paging,
Auto Attendant
The first tab in the Setup screen is the General tab:
On this tab, you can configure incoming call notification, overhead paging,
which auto attendant to use, and whether to allow auto answer and auto
release of an IP trunk link tie.