AJA FS1 Version 2.2.0.47 - Manual (Page 97)

1
87 FS1 Installation and Operation Manual — Remote FS1 Control Via a Web
AFD Out SDI1 (5.6)
AFD Out SDI2 (5.7)
Parameter selections are the same as for AFD Out SDI1.
Off (Default)
Auto
>16:9
Full Frame
Pillarbox
Letterbox
14:9
4:3 Alt 14:9
16:9 Alt 14:9
16:9 Alt 4:3
The FS1 does not insert an AFD code into the output. If the video input has an AFD code
and the FS1 is not up/down/cross converting it, the input AFD code will be passed
through to the output.
If the FS1 is not upconverting or downconverting the input video, the input AFD code is
passed through. If there is no AFD code on the input video, a “Full Frame” (8) code is
inserted. If the FS1 is upconverting, the appropriate AFD code will be chosen based on
the upconvert mode.
The FS1 always inserts a “Box > 16:9 (center)” AFD code (4), which indicates that the HD
image has an aspect ratio greater than 16:9 as a vertically centered letterbox within the
16:9 frame.
The FS1 always inserts a “Full Frame” AFD code (8), which indicates that the HD image is
full frame, with an aspect ratio that is 16:9.
The FS1 always inserts a “4:3 (center)” AFD code (9), which indicates that the HD image has
a 4:3 aspect ratio as a horizontally center pillarbox image within the 16:9 frame.
The FS1 always inserts a “16:9 (with complete 16:9 image protected)” AFD code (10), which
indicates that the HD image is full frame, with a 16:9 aspect ratio and all image areas are
protected.
The FS1 always inserts a “14:9 (center)” AFD code (11), which indicates that the HD image
has a 14:9 aspect ratio as a horizontally centered pillarbox within the 16:9 frame.
The FS1 always inserts a “4:3 (with alternate 14:9 center)” AFD code (13), which indicates
that the HD image has a 4:3 aspect ratio and with an alternative 14:9 centered pillarbox
image within the 16:9 frame.
The FS1 always inserts a “16:9 (with alternative 14:9 center” AFD code (14), which indicates
that the HD image has a 16:9 aspect ratio with an alternative 14:9 center within the 16:9
frame.
The FS1 always inserts a “16:9 (with alternative 4:3 center)” AFD code (15), which indicates
that the HD image has a 16:9 aspect ratio with an alternative 4:3 center within the 16:9
frame.