AJA FS1 Version 2.2.0.47 - Manual (Page 40)

30
Power
Requirements • Input Voltage—Chassis: autosensing 100VAC to 240VAC, 50/60Hz,
fully redundant with both power supplies diode isolated
• Power Consumption—25 Watts
Hazard Warning!
High Voltage. This situation or condition can cause injury due to electric shock.
Warning!
Do not open the chassis. There are no user-serviceable parts inside. Opening the chassis
will void the warranty unless performed by an AJA service center or licensed facility.
Warning!
Disconnect the external AC power supply line cord(s) from the mains power before
moving the unit.
Warning!
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
Warning!
Since the Mains plug is used as the disconnection for the device, it must remain readily
accessible and operable.
Warning!
Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point
where they exit from the device.
Warning!
To meet safety regulations for leakage current, connect the FS1 dual power supplies to
separate branch circuits.
Warning!
Refer all servicing to qualified service personnel. Servicing is required when the device
has been damaged in any wav, such as power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the device, the device has been exposed to rain or
moisture, does not operate normally, or has been dropped.
System Video/
Audio Cable
Connections When installing your system, you’ll make video and audio input/output
connections. These connectors are explained individually in Chapter 2.