Pathway DMX Dart Users Manual - Manual (Page 20)

DMXDart Operation
20
DMX Address (DMX Offset)
NOTE:
Incorrect addressing can result in unpredictable moving light response to control.
From the ML Parameters menu, press 2- DMX Offset to enter the DMX Offset
display:
DMX offset DMX offset
DMX offset 001 DMX offset 001
^ ^
Enter the DMX start address for the moving light with the lowest start address
using the number keys or the up and down arrows.
Press MENU to save and exit to the ML Parameters submenu.
Group Offset
Note:
The group offset cannot be less than the number of attributes within the moving
light.
To change the group offset,
From the ML Parameters submenu, press 3 - Group Offset
Group Offset Group Offset
Group Offset: 020 Group Offset: 020
^ ^
Enter the desired group offset using the number keys or the Ý and Þ keys.
Press MENU to save and exit to the ML Parameters submenu.