Power Soak 33755 PS-225 Owner's Manual - Manual (Page 21)

17
Changing the Wash Solution
The wash solution will need to be drained and refilled every four hours. The
controller will keep track of this time. 15 minutes before the wash tank timer
expires, the blue beacon will begin flashing.
The beacon will flash faster and faster until the timer expires. When the timer
expires, the wash action will stop and the blue beacon will become solid.
This indicates that it is time for the wash fluid to be changed. The wash action
can be restarted for one minute using the
button to aid in unloading the wash
tank before draining. (This can be repeated five times)
Changing the Sanitizer Solution
In most cases, the sanitizer solution will need to be drained and refilled every two
hours. In some situations a chemical provider and local codes allow a longer
change interval. When the sanitizer tank is filled a timer is started. 15 Minutes
before the sanitizer tank timer expires, the red beacon will begin flashing.
The beacon will flash faster and faster until the timer expires. When the timer
expires, red beacon will become solid.
If the tank does not detect a solution change after a time, the wash action will
stop and the red and blue beacons will flash in an alternating pattern.
Once this has happened, the only way to restart the wash action is to drain and
refill the sanitizer tank.