Power Soak 33755 PS-225 Owner's Manual - Manual (Page 10)

6
Panel Front Controls and Features
START Button
The START button is green and labeled “Start”. It is used to
start the wash action. If cycle does not start, refer to the trouble
shooting section.
STOP/IDLE Button
The STOP/IDLE mode button is red and labeled “Stop/Idle”. It is
used to pause the wash action. The wash action will resume
after a time, if the wash tank is not drained.
UNLOAD/LOAD Button
The UNLOAD/LOAD button is white with green up and down
arrows. It is used to indicate action to the controller when using
the timed unload/load wash cycle functions.