Power Soak 33755 PS-225 Owner's Manual - Manual (Page 11)

7
UNLOAD/LOAD Light
The UNLOAD/LOAD light is green and located next to the
UNLOAD/LOAD button. It is used to indicate to the operator
(along with the green indirect beacon) what action is needed in
the timed unload/load wash cycle.
STATUS Light
The STATUS light is green and labeled “Status/Estatus”. It is
used to indicate readiness of the wash tank and to indicate
errors detected by the controller.
WASH TANK Light
The WASH TANK light is blue and labeled “Wash Tank/Tanque
de Lavado”. It is used to indicate when the wash fluid needs to
be changed.
SANITIZER TANK Light
The SANITIZER TANK light is red and labeled “Sanitizer
Tank/Tanque Para Saneamiento”. It is used to indicate when the
sanitizer fluid needs to be either filled or drained.