LumaSense Technologies INNOVA 1316A-3 - Manual (Page 19)

Chapter 2
_________________________________________________________________________________________
_____________________________________________________________________________
BE6024-12 1316A-3 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 19 of 96
2.1.4 Checking and Changing the Fuses
On delivery ensure that the correct fuses are used. See section
5.1.2 .
2.2 The BZ 6014 Software
This software provides procedures to:
· Set-up and Calibrate the monitor prior to measuring
· Display measurement data as coloured graphics or numeric
values
· Store measurement data in a log file on the PC’s disk while
measurements are being made
· Control up to four Multi Gas Monitors INNOVA 1316A-3
The BZ6014 application can be installed by using the BZ6014
software CD-ROM.
2.2.1 Computer Requirements
The minimum requirements to run this software are:
Processor Minimum: 1 gigahertz (GHz) Pentium
processor
Operating System Windows XP (minimum Service Pack 2)
Windows Vista
Windows 7
RAM Minimum: 512 MB (Vista or 7: 1024 MB)
Hard Disk Up to 100 MB of available space may be
required.
Display Minimum: 1024 x 768 high color, 32-bit
Total port connections 1 RS232 port or 1 USB port
CD-ROM drive