IEI Integration SRM_121_150 v3.00 - Manual (Page 46)

SRM Series/SRM-KIT Series Monitor
Page 36
Step 4: Use the jumper(s) to set the correct voltage input. Replace the rear panel.
Step 5: Replace all removed screws. Step 0:
5.4 Connectors
Table 5-1 lists the external peripheral interface panel connectors for the SRM series
industrial monitors.
SRM-121 SRM-150 SRM-KIT121 SRM-KIT150
VGA Yes Yes Yes Yes
DVI-D Yes Yes Yes Yes
Power (12V Jack) Yes Yes Yes Yes
Power (9 ~ 36V) M model only M model only M model only M model only
RS-232 Touch Panel Yes Yes No No
USB Touch Panel Yes Yes No No
Table 5-1: External Peripheral Interface Connectors