IEI Integration SRM_121_150 v3.00 - Manual (Page 18)

SRM Series/SRM-KIT Series Monitor
Page 8
1.2.5 Top View
The top view provides access to retention screws that secure the back cover to the
chassis. The retention screw holes are circled in Figure 1-6 below.
Figure 1-6: Top View
1.2.6 Bottom View
The bottom view provides access to retention screws that secure the back cover to the
chassis. The retention screw holes are circled in Figure 1-7 below.
Figure 1-7: Bottom View
1.2.7 SRM Series I/O Panel
The I/O panel of the SRM Series shown in Figure 1-8 has the following interfaces.
ƒ 1 x RS-232 connector touch panel interface
ƒ 1 x USB connector touch panel interface
ƒ 1 x 9~36 V DC terminal block (M models only)
ƒ 1 x 12 V DC input connector
ƒ 1 x VGA connector
ƒ 1 x DVI-D connector