IEI Integration AFL-ххA-N26 - Manual (Page 67)

AFL-xxA-N26 Series Panel PC
Page 67
Step 8: Install a new WLAN module by inserting the card into the slot at an angle
Step 9: Push the WLAN module down until the spring retainer clips lock into place.
Step 10: Connect the two antennas.
Step 11: Replace the internal aluminum cover and the back cover. Secure them to the
chassis using previously removed retention screws. Step 0:
4.6 Reinstalling the Covers
WARNING:
Failing to reinstall the covers may result in permanent damage to the
system. Please make sure all coverings are properly installed.
When maintenance procedures are complete, please make sure all the covers are
replaced, including the following:
ƒ Aluminum cover
ƒ Plastic cover