beautypg.com

4 com3 port pin 9 select, Figure 3-13: clear cmos jumper, Table 3-4: com3 pin 9 setting jumper settings – IEI Integration AFL-ххA-N26 User Manual

Page 45: See figure 3-13, Own in figure 3-13, Afl-xxa-n26 series panel pc page 45

background image

AFL-xxA-N26 Series Panel PC

Page 45

Figure 3-13: Clear CMOS Jumper

3.8.4 COM3 Port Pin 9 Select

Jumper Label:

JP5

Jumper Type:

6-pin header

Jumper Settings:

See Table 3-4

Jumper Location:

See Figure 3-14

This jumper configures pin 9 on COM3 DB-9 connector. Pin 9 on the COM3 DB-9

connector can be set as the ring (RI) signal, +5 V or +12 V. The COM3 Pin 9 Setting

jumper selection options are shown in Table 3-4.

JP5

Description

Short 1-2

COM1 RI Pin use +12 V

Short 3-4

COM1 RI Pin use RI

Default

Short 5-6

COM1 RI Pin use +5 V

Table 3-4: COM3 Pin 9 Setting Jumper Settings

The COM3 Pin 9 Setting jumper location is shown in Figure 3-14 below.

This manual is related to the following products: