IEI Integration AFL-ххA-N26 - Manual (Page 135)

AFL-xxA-N26 Series Panel PC
Page 135
7.4 Preconfigured Jumper Settings
The following jumpers are preconfigured for the AFL-xxA-N26. Users should not change
these jumpers (
77
Table 7-38 ). It is only for reference.
Jumper Name Label Type
Backlight voltage selection J_BL1 3-pin header
Inverter ADJ power selection JP6 3-pin header
Inverter power selection JP1 6-pin header
LVDS voltage selection J_VLVDS1 3-pin header
Touchscreen selection J1 4-pin header
Table 7-38: Preconfigured Jumpers
7.4.1 Backlight Voltage Selection Jumper (J_BL1)
Pin Description
Short 1-2 +3.3 V (Default)
Short 2-3 +5 V
Table 7-39: Backlight Voltage Selection Jumper (J_BL1) Settings
7.4.2 Inverter ADJ Power Selection Jumper (JP6)
Pin Description
Short 1-2 +5 V
Short 2-3 +3.3 V (Default)
Table 7-40: Inverter ADJ Power Selection Jumper (JP6) Settings
7.4.3 Inverter Power Selection Jumper (JP1)
Pin Description
Short 1-2 +12 V (Default)
Short 3-4 +5 V
Short 5-6 +3.3 V
Table 7-41: Inverter Power Selection Jumper (JP1) Settings