IEI Integration UPC-V315-QM77 - Manual (Page 76)

UP C-V315-QM77 P a n e l P C
P a g e 65

Enabled D EFAULT Enable the serial port
 Ch an g e S ettin g s [Au to ]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=2E0h;
IRQ=5
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ5

IO=2E0h;
IRQ=5, 7
Serial Port I/O port address is 2E0h and the interrupt
address is IRQ5, 7

IO=2E8h;
IRQ=5, 7
Serial Port I/O port address is 2E8h and the interrupt
address is IRQ5, 7
4.3.7.1.4 S e ria l P o rt 4 Co n fig u ra tio n
 Serial Po rt [En ab led ]
Use the Serial Port option to enable or disable the serial port.

Disabled Disable the serial port

Enabled D EFAULT Enable the serial port
 Ch an g e S ettin g s [Au to ]
Use the Change Settings option to change the serial port IO port address and interrupt
address.

Auto D EFAULT The serial port IO port address and interrupt address
are automatically detected.

IO=2E8h;
IRQ=7
Serial Port I/O port address is 2E8h and the interrupt
address is IRQ7